Used to compact and prepare proctor specimens. Sturdy design with front door according to CE regulations and electrically operated drive system to lift and release the compaction rammer, to automatically move it
from centre to outer compaction and to turn the proctor mould during compaction. The complete test
procedure with number and place of compaction blows per each layer is controlled by a microprocessor
system with software according to each standard.
Up to two standards (EN+DIN or DIN+ASTM etc.) can be held in memory by the system.
The machine can be installed on any stable base.
The compaction height and the angle of rotation of mould per drop are controlled by easily exchangeable drive and angle plates.
The rod of the rammer increases the height of the machine to 2700 mm.
Supplied with
- 2.5kg 50mm diameter weight for 305mm drop
- 4.5kg 50mm diameter weight for 457mm drop
- 15kg 125mm diameter weight for 600mm drop
Different accessories sets according to each standard, comprising of special operation software, interchangeable drive and angle plates as well as rammers have to be ordered in separately.
Proctor moulds are not included and have to be ordered in separately.
Dimensions:. 530mm x 520mm x 1920/2700mm
Weight: 210 kg
Electrical Supply: 400V 50Hz 0.5 kW
