Vibrating Table, Fast-action clamp

Vibrating Table, Fast-action clamp

Required for compaction of 40 x 40 x 160 mm samples for EN 196-1 and BS 4550 standards. 


 

CodeCE231
Other StandardsEN 196-1 and BS 4550
Tariff90248000
Click to save page as PDF Save Page to PDF
addthis
or
Call Impact +44 (0)1294 602626

 

Required for compaction of 40 x 40 x 160 mm samples for EN 196-1 and BS 4550 standards. It can be ordered with either a fast-action clamp fitting or a general-purpose clamp fitting for (1) 3-gang mold

for 40 x 40 x 160mm samples. The vibrating plate is 400 x 300 mm in size and is built into a powder-

coated steel cabinet. The power switch box is mounted on a post attached to the top of the cabinet.

The oscillation frequency is 50Hz with a sinusoidalwaveform digital timer. Peak-to-peak value is 0.75

± 0.05mm. Note: A total vibrating mass of 35.0+/- 1.5 kg acc. to EN 196-1 can only be

guaranteed by utilizing the precision three-gangmold with feeding hopper listed below.


Vibrating Table, Fast-action Clamp, 230V 50/60Hz(CE231) Ship wt. 552lbs. (250kg)


Vibrating Table, General Clamp, 230V 50/60Hz(CE232) Ship wt. 552lbs. (250kg)


Precision, 3-gang Mold, EN 196 For use with the vibrating table above. 40.1 x 40 x160mm. Polished bright surface with numbered webs and nut plates. Electroless nickel finish.

C:\Users\Nurlan.Kubert\Desktop\HUMBOLDT\1.0202.06-bild-1-v1.jpg


Precision, 3-gang Mold(CE234)

Ship wt. 1.4lbs. (0.63kg)


P:\Kategorie 01 Zement\1.0202.06\1.0202.01\1.0202.01-bild-1-v1.jpg

Feeding Hopper, 3-gang Mold(CE236)

Ship wt. 1.4lbs. (0.63kg)