The AG435 Jaw Crusher is used for the rapid, gentle crushing and pre-crushing of medium-hard, hard, brittle and tough materials.
Application Examples
Alloys, basalt, cement clinker, ceramics, chamotte, coal, coke, construction
materials, feldspar, glass, granite, minerals, ores, oxide ceramics, quartz, rocks,
silicon, slag
Operation
The AG435 Jaw Crusher is a robust and powerful forced-feed crusher.
The feed material passes through the no-rebound hopper and enters the crushing chamber. Size reduction takes place in the wedge shaped area between the fixed crushing arm and one moved by an eccentric drive shaft. The elliptical motion crushes the sample which then falls under gravity.
As soon as the sample is smaller than the discharge gap width, it falls into a removable collector within the Jaw Crusher. The continuous gap width setting with scale ensures optimum size reduction in accordance with the set gap width.
Features
- excellent crushing performance
- connector for dust extraction
- wide range of materials for contamination free grinding
- wear compensation with zero-point adjustment
- continuous gap width setting
- overload protection
- no-rebound feed hopper with quick-release clamp
- brake motor with safety switch
- easy-to-clean crushing chamber
- continuous grinding
Specification
| Applications |
coarse and pre-crushing |
| Field of application |
chemistry / plastics, construction materials, engineering / electronics, environment / recycling, geology / metallurgy, glass / ceramics |
| Feed material |
medium-hard, hard, brittle, tough |
| Size reduction principle |
pressure |
| Material feed size* |
< 50 mm |
| Final fineness* |
< 4 mm |
| Material of grinding tools |
manganese steel, stainless steel |
| Jaw width |
60 x 60 mm |
| Gap width setting |
0 - 20 mm |
| Gap width display |
scale |
| Zero point adjustment |
yes |
| Hinged hopper |
yes |
| Dust extraction unit |
yes |
| Collector capacity |
2 l |
| Drive |
1-phase motor |
| Drive power |
0.75 kW |
| Electrical supply data |
230 V, 50 Hz |
| Power connection |
1-phase |
| Protection code |
IP 54 |
| W x H x D closed |
320 x 960 x 800 mm |
| Net weight |
~ 137 kg |
| Remark weight (without hopper etc.) |
0.75 kW |
| Standards |
CE |
* depending on feed material and instrument configuration/settings
