Ease of Use

• The detachable operating panel can beattached via velcro or with a specialsuspension at eye level for your

• convenience from outside closedfume hoods

• The evaporating flask clamp cannot belost due to a connection to the vaportube coupling ring

• The integrated coupling ring and thepatented clamping sleeve system allowsyou to remove sticking evaporatingflasks from the vapor tube just inseconds in a safe manner

• The universal heating bath can be adjusted horizontally up to 200mm and offers sufficient space to accommodate 5 litre flasks

• The height of 160 mm and the angle of the evaporating flask can be adjusted easily from 20° to 80°

Features

• Chemical-resistant vacuum seal allows for years of operation and reduces spare parts budget up to 75 %
• Bath power cable coupling complies with protection class IP 67 to prevent corrosion and short circuits
• The Non-sticking vapor tube with patented clamping sleeve eliminates broken glass and reduces spare parts cost significantly
• The flange made of chemical-resistant PPS reduces corrosion, maintenance and spare parts cost to a minimum
• Detachable operating panel:
• Changing all parameters from outside closed fume hoods guarantees the highest safety level
• Standard for all models is a panel with 1 m cable connection. Thus data security is guaranteed at any time
• Immediate access to the panel ensures ultimate control of the process while increasing your ease of use
• A separate on/off switch for heating prevents unintentional heat-up – the button is illuminated for visual control
• For your protection the detachable operating panel is located below the bath and thus outside the dangerous zone

Safety features

• Two independent safety circuits avoid an overheat situation of your heating bath: If bath temperature overshoots by 5 °C and if your water bath runs dry, heating will be switched off automatically

• To avoid an overtemperature situation and potential thermal damage to your sample, you can individually pre-program a maximum temperature on the Hei-VAP Precision, at which the bath powers off

• In case of a power cut, all motor lift models will remove the fl ask from the heating bath preventing safety hazards and potential thermal damage to your sample

• To protect you from splashes and scalding, the Hei-VAP heating bath features an integrated pour spout to remove bath fluid safely

• Heating bath is constructed with a double wall for your protection against burns and scalding

• The guard hood covers the entire bath completely even if the heating bath is adjusted horizontally to its most extreme limit

• A metal support between the heating bath and the base unit prevents bath instability

• To protect your heating bath against short-circuits and systematic corrosion, the cable coupling complies with the protection class IP 67

• For your protection, the operating panel is located near the base so as to keep your hands out of the dangerous zone of rotating fl asks, steam and splashing bath fl uids

• All heating baths feature non-slip handles with safety grip to protect you from scalding bath liquids and allow for easy installation/removal of the bath

• A separate on/off switch for heating prevents unintentional heat-up. The button is illuminated for visual control

• In case of an overshoot of any parameter setting, all models will show a warning on the operating panel

• Glassware assemblies are optionally available with transparent plastic safety coating ensuring ultimate protection while allowing visual control at all times

Specification